Centrifuges and vacuum concentrators

Centrifuges and vacuum concentrators

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for climatic chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Constant-temperature incubators, ovens, and furnaces

Constant-temperature incubators, ovens, and furnaces

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Controlled-environment CO₂ incubators and environmental chambers

Controlled-environment CO₂ incubators and environmental chambers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Cold storage, refrigerators, and freezers

Cold storage, refrigerators, and freezers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Biosafety cabinets

Biosafety cabinets

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Water purification systems

Water purification systems

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Shakers

Shakers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Remote monitoring systems

Remote monitoring systems

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

Contact Us

Thank you for your interest in getting in contact with us. Please complete the accompanying form in order to submit your request. A member of the Fisher Scientific Team will get back to you as soon as possible.



unity-lab-services

About Unity Lab Services

As part of Thermo Fisher Scientific, Unity Lab Services offers a full range of service plans and service solutions that help deliver optimal performance and worry-free operation, support regulatory compliance, and reduce maintenance so that you can focus on your work.

We are ready to serve you with more than 2,000 highly trained Unity Lab Services technical professionals globally. Our organization has been serving customers for more than 50 years and our engineers have an average of 18 years experience operating and maintaining the equipment that we service.