Imprinted clear black graduations ensure accurate readings CENTRIF TUBE PP 50ML BULK S CH

Improve sample recovery without additives or coatings. These tubes offer maximum sample recovery by significantly reducing surface binding.

Smooth and uniform inner surface with reduced risk of contamination SAMPLE TUBE W/O CAP 2ML RB FP=1000

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling 2.0ml FIS PREM MCT 05-408-145

Improve rotor fit and performance using Thermo Scientific™ Nalgene™ High-Speed Round-Bottom PPCO Centrifuge Tubes, featuring uniform wall thickness and diameter. X10 TUBES CENTRIFUGE ROUND PP 12ML AUTOCLAVABLE

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonimics with wider knurls and roll-over edge design for easier gripping. Corning™Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used undre recommended conditions. X300 Centrifuge tube 50ml, conical bottom, flat cap, Sterile, 25/Dual Rack

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling 1.5ml FIS PREM MCT 05-408-135

Tube cushion provides necessary support during centrifugation preventing large capacity tubes from collapsing X6 support cushions PEI for centrifuge tube 250ml(430776)

8-Strip domed or flat strip caps for Axygen PCR tubes X125 0,2ML 8 STRIP TUBE ORANGE

Recommended for use as reaction tubes in gel clot assays.  Lonza™ Pyrogen-free Test Tubes Product  are made from USP Type 1 flint borosilicate glass and contain less than 0.005 EU/ml endotoxin. X50 Pyrogen-Free Test Tubes 10x75mm w/Caps

Convenient, pierceable locking lids snap into place with one-handed operation X1000 MICROTUBE SAFELOCK NAT 0,6ML

Efficiently perform applications with these PCR tubes and plates, molded from 100% virgin polypropylene. X1000 tube,.2ml pcr, w/flat cap,blue

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. X6 ASTM TUBE 200ML 6' 200%

Use these tubes for the simple and safe processing of sample volumes up to 5.0mL. Eppendorf Tubes™ represent the perfect option for working with medium–sized sample volumes. Eppendorf Tubes, 5mL, Starter Pack, PCR clean,

Autoclavable polypropylene 0.5ML SC-MCT (FS) & CAP WITH O

Increase traceability of samples with one of the largest writing areas on the market when using these 15mL & 50mL conical sterile polypropylene centrifuge tubes. X500 Centrifuge tube Thermo Scientific Nunc conicaRöhrchen PP, Deckel HDPE (PU=500 pcs)

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors X1000 PCR TUBE 0,2ML DOMED ASSORT(VE=1000Stck.)

Tested to withstand centrifugation of 16,000 RCF in a fully supported rotor with room temperature water. Corning™ Falcon™ 50mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients. X500 Conical Bottom CentrifugeTube, High Clarity P

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 1.5mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. X5000 MICROTUBE AXYGEN MAXYCLEAR BOIL-PROOF SPECTRum pack polypropylene assorted colours1.5mL pack

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols. X1000 Round Bottom Test Tube, PS, 16ml, Screw Cap,

Supplied with fitted screw cap designed to avoid contamination resulting from drops of liquid on the inner surface. Kartell™ Polypropylene Test Tubes meet test tube needs and are suitable for centrifugation. X1000 cylindrical sterile test tubes with screw cap PP 15ml blue

Seal microtiter tubes tightly for storage with these polyethylene plug strips for use with 1.2mL MCT Titertube Racks.

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 0.60mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. X10000 MICROTUBE AXYGEN MAXYCLEAR SPECTRUM PACKpolypropylene assorted colours 0.6mL pack contains

Manufactured from polypropylene for excellent chemical and thermal resistance. Corning™ Falcon™Round-Bottom Polypropylene Tubes are tested to withstand 3000 x g centrifugation. X1000 Round BottomTest Tube, PP, 5ml, No Cap, Nons

Store test reagents and materials. Fisherbrand™ borosilicate glass test tubes come in a variety of sizes. X50 Test tube Fisherbrand medium wall rimless

Use these tubes for general lab applications. ratiolab™ Polypropylene Sample Tubes are made from clear polypropylene. X1000 Test Tube, PP, 12 ml, round bottom

Minimize sample loss with the “snap shut” lids on these individual 0.5mL tubes for PCR applications. X1000 PCR TUBE 0,5ML FLAT RED(VE=1000Stck.)

Easily confirm your microcentrifuge tube is locked for superior security during centrifugation. X500 Mikro-Centrifuge Tube 1,5ml Safelock cap sterile

For instruments with field strength of approximately 60MHz X50 TUBINGS NMR A USAGE UNIQUE, 5 MM L

Tubes precisely fit industry standard well spacing 125 Strips 200UL MICROAMP 8-TUBE STRIP,0.2ML STOREat room temperature