Sieves

Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh

Made from stainless steel and available in a wide variesty of sizes. Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh has a 200mm diameter. Stainless Steel Test Sieve with Woven Wire Mesh200mm 45um

Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh

Made from stainless steel and available in a wide variesty of sizes. Fisherbrand™ Stainless Steel Test Sieve with Woven Wire Mesh has an 100mm diameter. SIKT 100MM RFR 600UM

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 50mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 50mm and diameter of 200mm. Available in a wide range of pore sizes smaller than 1mm. TEST SIEVE ISO 3310/1 200X50MM 500µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless Steel Test Sieve

Use these test sieves for all types of laboratory sampling and particle size analysis. Endecotts™ Stainless Steel Frame Test Sieves can be supplied with aperture sizes ranging from 125mm down to 20 microns in full and half height versions. TEST SIEVE ISO 3310/1 8''X2'' 710µM STAINLESS S. W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Endecotts™ Stainless Steel Test Sieve, 200mm dia.

Full height test sieves provide all types of laboratory sampling and particle size analysis. Endecotts™ Stainless Steel Test Sieves, 200mm dia. comply with ISO 3310-1 / BS410 standards. SIKT 200X50 RFR 20 MICRON ENDECOTTS ISO 3310-1

Biodesign™ Nylon Matrix Filter CellMicroSieves™

Allow the rapid, yet gentle, isolation of cells, organelles, or cellular debris. Matrix filter CellMicroSieve 5um, 61x91.5cm roll610mm x 915mm roll 5µm pore size

Fisherbrand™ Stainless Steel Receiver For Test Sieves

For the collection of materials processed through Fisherbrand™ Stainless Steel Test Sieves. RECEIVER STAINLESS STEEL 100MM

Retsch™ 200 dia. x 25mmH Stainless Steel Test Sieve

Retsch Test sieve 200x25mm 22.4mm 7/8'' ASTM E 11

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 50mmH, Pore sizes 10mm and smaller, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 50mm and diameter of 200mm. Available in a wide range of pore sizes between 1mm and 10mm. TEST SIEVE ISO 3310/1 200X50MM 1.25MM STAINLESS S. W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Retsch™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. Retsch Test sieve 200x25mm 180µm ISO 3310/1

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 50mmH, Pore sizes greater than 10mm, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 50mm and diameter of 200mm. Available in a wide range of pore sizes larger than 10mm. Retsch Test sieve 200x50mm 125.00mm ISO 3310/1

Fisherbrand™ 203.2 dia. x 50.8mmH Stainless Steel Test Sieve, ISO Certificate, Micrometer Pore Sizes

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 8''X2'' 63µM STAINLESS S. W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless Steel Lids For Test Sieve

Providing a secure closure to Fisherbrand™ Stainless Steel Test Sieves. LID STAINLESS STEEL 100MM

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 25mmH, Pore sizes 10mm and smaller, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of pore sizes between 1mm and 10mm. Retsch Test sieve 200x25mm 2.24mm ISO 3310/1

Fisherbrand™ Stainless-Steel Test Sieves, 200 Dia. x 25mmH, Pore sizes greater than 10mm, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of pore sizes greater than 10mm. Retsch Test sieve 200x25mm 14.00mm ISO 3310/1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 63µM STAINLESS S. W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 125µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 250µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 100µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 500µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Fisherbrand™ Stainless-Steel Test Sieve, 200 Dia. x 25mmH, Pore sizes in micrometers, ISO 3310/1

Use for separation, fractioning, or particle size determination. These stainless-steel test sieves have an internal height of 25mm and diameter of 200mm. Available in a wide range of micrometer pore sizes. TEST SIEVE ISO 3310/1 200X25MM 150µM STAINLESS S.W/ COMPLIANCE CERTIF. ACC. EN 10204 2.1

Bel-Art™ SP Scienceware™ Mini-Sieve Microsieve Set

Offers easy handheld use for the lab or the field SIEVE SET SCIENCEWARE 18 PIECE MINI POLYPROPYLENE4 screen holders & retaining rings, 1 catch pan &

Bel-Art™ SP Scienceware™ Additional Mesh Inserts

For use with Mini-Sieve™ micro sieve set. MINI-SIEVE,MESH INSERT,ASSORTMENT

Retsch™ 305 dia. x 40mmH Stainless Steel Test Sieve with Square Holes

Retsch Test sieve 305x40mm square hole106.0mm ISO3310/2

RETSCH Economy Clamping Device for AS 200 Sieve Shaker

Provides reliable, quick and convenient clamping of sieves in dry operation. CLAMPING DEVICE ''ECONOMY'' FOR TEST SIEVES 100/150/200/203 MM Ø

Retsch™ 400 dia. x 65mmH Stainless Steel Test Sieve with Square Holes, ISO Certified

Retsch Test Sieve 400x65mm square hole 9.00mm ISO3310/2

Endecotts™ Brass and Stainless Steel Test Sieve, 200mm dia.

Full height test sieves provide all types of laboratory sampling and particle size analysis. Endecotts™ Brass Frame Test Sieves comply with ISO 3310-1 / BS410 standards. SIEVE TO BS410,BRASS FRAME, 200MM DIA. APERTURE

Retsch™ 200mm Diameter ISO Stainless Steel With Wire Gauze Test Sieve

Calibration certificate for sieve, in EnglishSerial No. 12039419

  spinner