Eppendorf™ 5810 Centrifuges without Rotor

Description

Available in two different sizes: the 5804 (and the refrigerated model 5804 R) can accommodate up to 400mL in the swing-bucket rotor while the 5810 (and the refrigerated model 5810 R) offer a capacity of 1, 600mL, also in the swing-bucket rotor. Low loading height, makes both centrifuges easy to load, unload and clean. Low noise levels ensure a pleasant working environment, and the motorised lid latch allows the lid to be closed easily, with very little force. The control panel is easy to follow: 34 programs can be stored and 10 startup and braking ramps are available for sensitive samples. A wide variety of test tubes may be used. Stand-by cooling and a 'Fast temperature' function allow sensitive samples to be cooled rapidly and reliably, even at maximum speed.

14, 000rpm

Microprocessor control ensuring ease of use and reproducibility of results

Easy to read backlit LCD and easy to clean soft keypad

Electronic imbalance detection and automatic rotor recognition

Short spin key

Motorised lid latch

Selectable program memory for up to 34 individual programs

Stand-by cooling, Fast Cool on 5804 R and 5810 R

Maintenance free drive

Extensive range of rotors and adapters

Speed, RCF or radius correction values may be entered

Values may be changed during centrifugation

Short spin function with selectable rotational speed

10 acceleration and braking ramps for sensitive sample material

Temperature range from -9°C to 40°C (5804 R and 5810 R only)

Fast temperature for rapid precooling of the centrifuge (5804 R and 5810 R only)

Stand-by refrigeration (5804 R and 5810 R only)

Rotor A-4-81

• 4 x 400mL rectangular buckets for high capacity
• Ideal for medical and biotechnology laboratories: flexible adapters enable high sample throughput
• Rotor buckets, caps and adapters are autoclavable (121°C, 20min)

Rotor A-4-81-MTP

• Swing-bucket rotor A-4-81 can be upgraded with 4 MTP/Flex buckets to the MTP rotor A-4-81-MTP
• For up to 16 microtitre plates or 12 culture plates or 4 deep well plates and all plate stacks of the Perfectprep™ plasmid kit

Rotor A-4-6

• All in one rotor cross for 4 x 250mL rectangular buckets and 4 MTP buckets
• Flexible adapters for a wide range of tubes
• Swing-bucket rotor with rectangular buckets: maximum rotational speed: 4, 000rpm (max. RCF: 3, 150 x g)

Rotor A-4-62-MT

• Swing-bucket rotor A-4-62 can be upgraded with 4 MTP buckets to the MTP rotor A-4-62-MTP
• For up to 16 microtitre plates, 12 culture plates or 4 deep well plates
• Swing-bucket rotor with MTP buckets: maximum rotational speed: 4, 000rpm (max. RCF: 2, 750 x g)

Rotor A-2-DWP

• Different combinations of stacked plates can be centrifuged
• Commercial nucleic acid purification kits up to a maximum height of 85mm can be used
• Simultaneous processing of up to 192 samples
• Maximum rotational speed: 3, 700rpm (max. RCF: 2, 250 x g)
• Rotors and buckets are autoclavable (121°C, 20min)

Rotor A-4-44

• 4 x 100mL rectangular buckets for high capacity
• Flexible adapters for a wide range of tubes
• Maximum rotational speed: 5, 000rpm (max. RCF: 4, 500 x g)
• Caps for aerosol-tight centrifugation
• Rotor buckets, caps and adapters are autoclavable (121°C, 20min)
• Also available with four buckets for conical 50mL tubes

Rotor T-60-11

• Horizontal centrifugation at high relative centrifugal force
• Particularly suitable for low sample quantities
• For pellet formation at bottom of the tube
• At maximum speed of 14, 000rpm (max. RCF: 16, 400 x g) a temperature of 4°C is maintained in the 5804 R and 5810 R

Rotor F-34-6-38

• Six boreholes for different tubes (max. tube size: 85mL)
• Maximum rotational speed: 11,000rpm (max. RCF: 15, 550 x g)
• When used in centrifuge 5810 R: maximum rotational speed: 12, 000rpm (max. RCF: 18, 500 x g)
• Conical tubes such as 15mL and 50mL: Falcon™ tubes can be centrifuged with adapters in the fixed angle rotor
• Rotors, caps and adapters are autoclavable (121°C, 20min)

Rotor F45-30-11 and FA-45-30-11

• 30 positions for 1.5mL/2.0mL test tubes
• Maximum rotational speed: 14, 000rpm (max. RCF: 20, 800 x g)
• Rotor, lids and adapters are autoclavable (121°C, 20min), the rotor FA-45-30-11 with lid can even be autoclaved for 2hr at 140°C, to destroy prion contamination
• High quality, extremely robust aluminium lid for both rotors
• Aerosol-tight centrifugation possible with the rotor FA-45-30-11

Rotor F-45-48-PCR

• PCR* strip rotor: max. rotational speed 12, 000rpm (max. RCF: 15, 350 x g)
• Up to 6 x 8 tube strips, 6 x 5 tube strips or 48 x 0.2mL PCR* tubes 5804/5804 R and 5810/5810 R centrifuges designed for practically all refrigerated and non-refrigerated applications.