Filtered Search Results
Sartorius Minisart™ NML Syringe Filters, Sterile
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Provides fast and reliable filtration of small to medium volumes, complete with ready-to-connect filter units. Sartorius Minisart™ NML Syringe Filters, Sterile eliminate time consuming preparatory work, such as changing out the filter and cleaning the filtration system.
| Disposable | Single-use |
|---|---|
| For Use With (Equipment) | Syringe |
| Diameter (Metric) | 28 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Meta acrylate butadiene styrene polymerisate (MBS) |
| Volume (Metric) | 200 mL |
| Sample Volume | 1 to 200 mL |
| Filter Type | Syringe Filter |
| For Use With (Application) | Preparation of aqueous liquids |
| Hold up Volume (After Air Purge) | 0.15 mL |
| Sterility | Sterile |
| Filtration Area | 6.2 cm2 |
Fisherbrand™ ProFill HPLC Syringe Filters, Nylon (PA) membrane
HPLC performance tested
| Material (Membrane) | Nylon |
|---|---|
| Packaging | PE-Bag, additionally packed in a PP-Box |
Choice™ PTFE (Hydrophilic) Syringe Filters
Use Choice PTFE Hydrophilic Syringe Filters to filter aggressive organic, highly basic or hot solutions. They can filter aqueous solutions without pre-wetting.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Solvent Resistent, Low-Extractable Polypropylene |
| Material (Membrane) | PTFE (Hydrophilic) |
| Quantity | 100/Pk. |
| Pressure Rating | 90 psi |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Choice |
Choice™ PTFE (Hydrophobic) Syringe Filters
Use Choice PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Solvent Resistent, Low-Extractable Polypropylene |
| Material (Membrane) | PTFE (Hydrophobic) |
| Quantity | 100/Pk. |
| Pressure Rating | 90 psi |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Choice |
Choice™ PVDF (Hydrophilic) Syringe Filters
Use Choice PVDF (hydrophillic) Syringe Filters for general biological filtration, especially when high protein recovery is desired. They do not require pre-wetting.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Solvent Resistent, Low-Extractable Polypropylene |
| Material (Membrane) | PVDF (Hydrophilic) |
| Quantity | 100/Pk. |
| Pressure Rating | 90 psi |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Choice |
Thermo Scientific™ Titan3™ PTFE (Hydrophobic) Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust hydrophobic PTFE syringe filters.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Polypropylene |
| Material (Membrane) | PTFE (Hydrophobic) |
| Certifications/Compliance | Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . |
| Sterility | Non-sterile |
| Product Line | Titan3 |
Fisherbrand™ ProFill HPLC Syringe Filters, PTFE membrane
HPLC performance tested
| Type | HPLC Syringe Filter |
|---|---|
| Material (Membrane) | PTFE |
| Quantity | 100/Pk. |
Thermo Scientific™ Target2™ PTFE Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust PTFE syringe filters.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Polypropylene |
| Material (Membrane) | PTFE (Hydrophobic) |
| Certifications/Compliance | Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Target2 |
Thermo Scientific™ Target2™ Cellulose Acetate Syringe Filters
Ensure cleaner sample extracts by removing interfering materials and fine particles prior to injection with these robust cellulose acetate (CA) syringe filters.
| Disposable | Single-use |
|---|---|
| Type | Syringe Filter |
| Housing Material | Polypropylene |
| Material (Membrane) | Cellulose Acetate |
| Quantity | 100/Pk. |
| Certifications/Compliance | Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. |
| For Use With (Application) | HPLC, SPE |
| Prefilter | No |
| Sterility | Non-sterile |
| Product Line | Target2 |
Cytiva Whatman™ Mini-UniPrep™ Syringeless Filters with Preslit Septa
Processes sample loads in one-third the time. Whatman™ Mini-UniPrep™ Syringeless Filters with Preslit Septa provide a faster and easier way to remove particulates from samples being prepared for HPLC and UHPLC analysis.
| For Use With (Application) | Routine HPLC/UHPLC analysis; Composite assays; Content uniformity; Protein precipitation; Solubility testing; Dissolution testing; Sample filtration; Standard robotics on HPLC instruments with sensitive needles, allowing for higher throughput; Light sen |
|---|
Cytiva Whatman™ 30mm Puradisc PTFE Syringe Filters
Designed to be resistant to organic solvents. Whatman™ 30mm Puradisc PTFE Syringe Filters are ideal for the clarification of aggressive organic solvents and can also be used as a venting filter for small vessels.
| Type | Syringe Filter |
|---|---|
| Outlet Style | Male Luer |
| Diameter (Metric) | 30 mm |
| Inlet Style | Female Luer Lock |
| Housing Material | Polypropylene (PP) |
| Material | PTFE |
Sartorius Minisart™ High Flow Syringe Filters: Sterile
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Features PES membrane filter for excellent flow speed and high filtrable volume. Sartorius Minisart™ High Flow Syringe Filters: Sterile provide sterile filtration, particle removal and ultracleaning. Independent, ready-to-use syringe filters offer flow rates at low inlet pressures allowing for a correspondingly rapid sterile filtration.
| Disposable | Single-use |
|---|---|
| Housing Material | Meta acrylate butadiene styrene polymerisate (MBS) |
| Material (Membrane) | PES |
| Volume (Metric) | 200 mL |
| Quantity | 50 Pk. |
| Sample Volume | 1 to 200 mL |
| For Use With (Application) | For sterile and reliable filtration of small to medium volumes |
| Sterility | Sterile |
| Filtration Area | 6.2 cm2 |
| For Use With (Equipment) | Syringe |
| Diameter (Metric) | 28 mm |
| Inlet Style | Female Luer Lock |
| Packaging | Individually Packaged |
| Filter Type | Hydrophilic |
| Hold up Volume (After Air Purge) | 0.15 mL |
Sartorius Minisart™ Plus Syringe Filters, Sterile
SureTRACE
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Supports traceability with guaranteed access to certificates and proactive change notifications.
Learn More
Includes a glass fiber pre-filter for difficult to filter liquids. Sartorius Minisart™ Plus Syringe Filters are single-use, complete filtration units with a surfactant-free cellulose acetate membrane. Choose from three color-coded pore sizes in sterile or non-sterile options.
| Disposable | Single-use |
|---|---|
| Housing Material | Metaacrylate butadiene styrene polymerisate (MBS) |
| Material (Membrane) | SFCA |
| Volume (Metric) | 200 mL |
| Quantity | 50/Pk. |
| Sample Volume | 1 to 200 mL |
| Pressure Rating | 4.5bar |
| For Use With (Application) | For rapid small volume sterilization |
| Sterility | Sterile |
| Filtration Area | 5.16 cm2 |
| Type | Syringe Filter |
| Outlet Style | Male Luer Lock |
| For Use With (Equipment) | Syringe |
| Diameter (Metric) | 28 mm |
| Inlet Style | Female Luer Lock |
| Filter Type | Hydrophilic |
| Prefilter | Glass Fiber |
| Hold up Volume (After Air Purge) | 0.1 mL |
Cytiva Acrodisc™ Syringe Filters with Supor™ Membrane, Sterile
Sterile Acrodisc syringe filters featuring Supor™ membrane for high throughputs, fast filtration, and low protein binding. Available in 13 mm, 25 mm and 32 mm sizes, with pore sizes ranging from 0.1 μm to 5.0 μm.
| Material (Membrane) | PES |
|---|---|
| Sterility | Sterile |
Cytiva Acrodisc™ Syringe Filters with PTFE Membrane and Minispike Outlet
Universal membrane syringe filters for all of your analytical filtration requirements.
| Outlet Style | Minispike Outlet |
|---|---|
| Diameter (Metric) | 13 mm |
| Housing Material | Polypropylene |
| Material (Membrane) | PTFE |
| Temperature (Metric) Max | 100°C |
| Hold up Volume (After Air Purge) | <14 μL |
| Sterility | Non-sterile |
| Filtration Area | 1 cm2 |